Give your idea a mind of its own
B00 is the agentic project hub that makes an idea and the willingness to build it the only entry point.
All it takes is an idea and the will to build it. B00 does the rest with you.
01 — Build
One sentence and B00 plans the build — parts, budget and weeks, before a single file exists
Type an idea above and it lands here
Tell me what you're building and I'll walk through it with you.
- 1Name the loadsMass, speed, duty cycle — the numbers every part is sized against.
- 2Pick the drivelineMotor, gearing and power, matched to those loads instead of guessed.
- 3Draw the structureOne assembly, one drawing, one bill of materials that agree with each other.
- 4Test and recordBench results land next to the revision they belong to.
Upload your first model and B00 follows along.
Parts to buy
Total $746 / $800
6374 hub motors ×2170KV, sensored$218
12S4P battery packSamsung 40T, BMS incl.$289
Dual ESC + remoteVESC-based, 50A$142
Deck + trucks + wheels40″ maple, 105mm$97
$54 left for hardware + sealant
The 6-week plan
- W1Order parts
- W2–3Deck + drivetrain
- W4Wiring + enclosure
- W5First ride tests
- W6Review + revise
B00 is there for every file
Then everything real lands in the same project
02 — Source
Ask what it takes to build and keep the answer as part of the project
B00 searches for the real components — photos, specs, current prices and buy links — then saves the list into Files, where it can be revised, ticked off as parts arrive and exported for whoever does the ordering.
Files · BOM · Motion parts.parts.json
Motion parts
$81.95
- NEMA 17 stepper1.8° · 42×42 mm · qty 2$12.40 Ordered
- A4988 driver board8–35 V · heatsink · qty 2$3.10 Ordered
- GT2 belt + idler kit6 mm · 2 m · qty 1$8.95 Buy
- Linear rail MGN12H300 mm · preloaded · qty 2$21.00 Buy
03 — B00 works
A chatbot answers. A hub does the work — and shows you why
- File Assembly.step as revision R5The upload changed 41 faces near the motor mount — that reads as a revision, not a new file.
- Bracket-drawing.pdf is a revision behindThe drawing still dimensions R2. The model it describes is on R4.
- Keep supplier-quote.pdf privateIt carries pricing and a contact name, and this project is published.
- Design a 4 mm sensor mountYour BOM already uses M4 fasteners and the measured gap is 38.2 mm.
B00 watches the project, not the chat window. It proposes the next move, traces every number back to the file it came from, flags what it guessed — and nothing lands until you say yes.
04 — Manage
Revisions , reviews and decisions — all attached to the work
Maya — Bench test fails at 12° — mass sits too far outboard.
Kev — Bringing it 18 mm inboard without touching the wiring.
B00 — R4 changed the bracket. The drawing still shows R2.
Teammates and B00 work the same record at the same time — with a timeline of how the project got here and per-file privacy, so a published project can still keep its internals internal. Nothing is filed twice, nothing is lost in a thread.
Questions
No. Start with a sentence describing what you want to build. B00 turns it into a plan, a parts list and a schedule, and the project grows from there — files come later, when you have them.
Hardware, in one place. Built together.
Collaborative VibeBuilding
your project
B00 is in private beta. Leave your address and we'll keep this idea attached to your invite, so your first project starts where this one left off.
Already invited? Sign in